facebook

Floor tiles are practical and stylish, however over time grout lines do start to become dirty and stained. Regular mopping tends to push dirt back into the grout lines. The Britex Grout & Tile cleaning system provides a new way of tackling dirty grout and tiles. Follow these simple steps to deep clean your floot grout & tiles.

WHAT YOU WILL NEED ?

Britex deep cleaning machine

Britex grout & tile wand

Britex grout & tile cleaning solution

Britex grout and tile brush refill

FLOOR GROUT & TILE CLEANING STEPS

1. Turn the pump button on the Britex machine and position the wand head to the vertical grout cleaning position.
2. Spray solution on the floor with the Britex grout & tile wand and scrub the grout lines in a back and forth motion.
3. Swivel the head to the horizontal tile cleaning position.
4. Turn on both the pump & vacuum buttons on the Britex machine. Apply water to the tiles as needed using the spray trigger. To extract water from the tiles, lift the edge of the mop that is closest to you slightly off the ground so that the mop head is tilted. Mop over the tiled area, bringing the wand head towards you, extracting water as it goes.
5. Repeat this process until all of the desired area of grout and tiles are cleaned.
6. Click here for more detailed instructions.

TOP TIP

 Watch the how-to clean grout & tiles with the Britex deep cleaner video here.

 Cleaning grout? Turn pump button ON, leave VAC button OFF.

 Cleaning tiles? Turn both pump and VAC buttons ON.

 For stubborn grout stains, spray water and cleaning solution into the grout lines with the wand. Let it sit for a minute or two then start cleaning.

OTHER HELPFUL STAIN REMOVAL VIDEOS

How to remove slime from carpet

How to remove gum from carpet

How to remove dirt from carpet

Find A Store Call Helpline